ok, so the fans fitted, ducting in place, everythings done but the wiring. problem is i've never worked with this setup of wiring before.
here's the setup i have:
i've read alot of posts on here on fitting extractor fans in bathrooms, but only 1 guy was working with the same wiring as me, and he didnt get an answer.
the fan comes with a manual, but its a rubbishy black and white photocopy that i'd need a microscope to read. the inside of the fan was labelled, so i know the wiring is connected to the inside of the fan fine.
i'd be very grateful if someone could give me a diagram, or complete mine, and show me exactly how to wire this up. i need it to have a constant live, so anytime the shower in the bathroom is on the humidity part of the fan can operate(should self activate). the fan also has a timer, that runs for a preset period of time after the light in the bathroom has been turned off.
here's the setup i have:
i've read alot of posts on here on fitting extractor fans in bathrooms, but only 1 guy was working with the same wiring as me, and he didnt get an answer.
the fan comes with a manual, but its a rubbishy black and white photocopy that i'd need a microscope to read. the inside of the fan was labelled, so i know the wiring is connected to the inside of the fan fine.
i'd be very grateful if someone could give me a diagram, or complete mine, and show me exactly how to wire this up. i need it to have a constant live, so anytime the shower in the bathroom is on the humidity part of the fan can operate(should self activate). the fan also has a timer, that runs for a preset period of time after the light in the bathroom has been turned off.