wma35-more woes

[jaykayuk]

i changed bearing all went ok.
found the loose earth.
now it will not go into spin .it was ok before i got at it
any clues???

 

[rocks1]

does the drum go round on wash cycle

 

[jaykayuk]

yes,seems to work ok,except it dont want to go into spin.
have to turn it to off position to open door water has drained out,
but it would having wires for the pressure valve do any thing???

 

[breezer]

yes.

prseesure switch says when to fill, when to stop, is it empty (so can it spin)

 

[rocks1]

is the sump clear and the pressure pipe on the side clear .blow though the pipe see wot happens make sure drum is empty of clothes

 

[jaykayuk]

meant to say p/switch wire back to front.
it seems to m/t ok if i lower out let pipe after wards only get about half a pint of water out.

 

[rocks1]

when you fill up on wash does water stop when it gets to door bowl if yes not a pressure prob ,also does all the water empty out under 30 secs when put on spin

 

[jaykayuk]

thanks,rocks.
took pump out,cleaned it,same with pressue valve.
reversed wires to valve.
lo and behold all works ok now. thanks again.

 

[rocks1]