My W/B has kicked up a new issue....
Pilot light on, Extractor on, ignition clicking, no main boiler start.
No central heating or hot water.
Checked gas pressure, with gas cooker/OK, besides prior to this the boiler would ignite for the hot water circuit.
Recently changed pump head unit, cleaned heat exchanger, fitted new diverter microswitch and replaced ignition relay on ignition board.
After water ingress in the timer board I had to bridge timer circuit with an external plug in time-switch, which worked ok.
Any idea's
Stumped on this one.
Pilot light on, Extractor on, ignition clicking, no main boiler start.
No central heating or hot water.
Checked gas pressure, with gas cooker/OK, besides prior to this the boiler would ignite for the hot water circuit.
Recently changed pump head unit, cleaned heat exchanger, fitted new diverter microswitch and replaced ignition relay on ignition board.
After water ingress in the timer board I had to bridge timer circuit with an external plug in time-switch, which worked ok.
Any idea's
Stumped on this one.