Wood flooring with less prominent joints

Joined
2 Dec 2013
Messages
5,826
Reaction score
1,154
Country
United Kingdom
Dear Experts,

In my living room no angle is 90 degrees. I need a new floor soon, and I'm dismayed to find that most wooden flooring has rather prominent joints - "micro V grooves", or somesuch - between the boards. This will mean that where I inevitably have a wall where the flooring isn't exactly parallel, that will be more prominent.

I may post another thread asking how best to lay boards to cope with this, but for now my question is just: can anyone suggest a wooden flooring product that has less prominent joints between the boards? A local flooring retailer said that this was rare but that perhaps Quickstep have something "because they have everything". Any ideas?

Thanks.
 
Dimmer light bulbs. Nobody except you will notice it.

Hmm, well I’m not too bothered what other people think of it; it’s the fact that I will notice it that is the problem!
 
Look up Kahrs engineered floors, they still have boards that click together to form a flat joint
 
Look up Kahrs engineered floors, they still have boards that click together to form a flat joint

Thanks! Unfortunately their site will let me filter by “bevelled” or “microbevelled” but I don’t see an easy way to show the non-bevelled products. I’ll keep trying :-(
 
Thanks! Unfortunately their site will let me filter by “bevelled” or “microbevelled” but I don’t see an easy way to show the non-bevelled products. I’ll keep trying :-(
I used kahrs oak Hampshire 1 strip engineered boards
 
I used kahrs oak Hampshire 1 strip engineered boards

Do you think “smooth” is the feature I have to search for?

Unfortunately I don’t see much in darker tones, which is what I think I want.

Is the Hampshire better than the cheaper products?
 
Do you think “smooth” is the feature I have to search for?

Unfortunately I don’t see much in darker tones, which is what I think I want.

Is the Hampshire better than the cheaper products?
I sanded and re mayor to replace some damaged boards that had an identical width and depth. There seems to be less veneer on these but not a problem. They are 1 strip engineered wood and pretty much replicate solid floorboards. The originals have been down 20 years and worn well
 
V4 have some non-bevelled product I believe, how much of the skirting is visible once furniture is in the room?

Thanks. I’ve ordered some flooring now and will post again when I’m fitting it. Yes eventually much will be hidden but there are a couple of problematic bits.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top