Worcester-Bosch Greenstar 30Si two short bursts of noise when call hot water or heating

Joined
16 Sep 2014
Messages
5
Reaction score
0
Country
United Kingdom
Worcester-Bosch Greenstar 30Si (G.C. No. 47 311 85 N.G.)

Had a new Flow Unit fitted as previous had developed a pin hole leak. Also topped up system inhibitor. Then this noise has appeared.

I'm going to checking if anything that is easily accessible is loose, but apart from that I could use any pointers from anyone that has experienced this issue or recognises the noise.

System controlled by a wired Honeywell programmable thermostat.

Link to 8 second video:
https://imgur.com/0eVOh9T
 
Sponsored Links
Yes, it was the diverter valve.

Had the control panel down while trying to find source of noise and the diverter valve fell out of its holding block. Looked like it was not pushed in correctly so clip that would engage at back wasn't connected.

Red circle is the block that diverter valve locks into.

W15r2pw.jpg
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top