Not familiar with the worcester condensers except the 26Cdi xtra, had a similar problem on a 350 model, the byepass built into the boiler was open too far, has your boiler got a built in manual byepass that needs adjusting
The guy who fitted it is coming back on Wednesday to check it out.
I've been watching it and the rate at which the flow temp increases would seem to fit in with the pump speed not being very high.
It was a bit of a cold night last night and in 6 hours the room temp only reached 19 DegC! It took 5 hours to get there.
There is a pump setting in the service menu, it's on the default setting at the moment, 4 on a range of one to seven. I'm not sure what this setting does though, as Kev mentioned it's a variable speed pump.
One thing I am impressed with is the DHW flow rate, it delivers an absolutely stunning shower
I'll keep looking at the menus and settings and will let you know how things develop.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local