Dear All
I inherited an old Worceter Highflow 3.5 BF in the house that I moved in few months ago. I managed to get it going by replacing the pump, the diverter valve, the control timer and the pump overrun pcb broad. It has worked perfectly for few months then the pilot started going off on weekly basis.
Following some threads in this forum, it suggests here are that two things I need to look at i.e thermocouple and cleaning pilot injector, it might be partially blocked.
I would like to try and clean the pilot injector as well as the thermocouple before thinking of replacing them. Can I clean them without taking them a part by just remove shield around them and what sort of material I need to use?
thanks
I inherited an old Worceter Highflow 3.5 BF in the house that I moved in few months ago. I managed to get it going by replacing the pump, the diverter valve, the control timer and the pump overrun pcb broad. It has worked perfectly for few months then the pilot started going off on weekly basis.
Following some threads in this forum, it suggests here are that two things I need to look at i.e thermocouple and cleaning pilot injector, it might be partially blocked.
I would like to try and clean the pilot injector as well as the thermocouple before thinking of replacing them. Can I clean them without taking them a part by just remove shield around them and what sort of material I need to use?
thanks