Worchester Bosch Junior 241/28i

[zaleave]

OK, so my heating takes forever to get to temperature if at all. When I say temperature I mean 15-17 degrees which is where I am normally.

Today I decided to get up into the roof space and check if maybe the temp was set too low - it was 5 out of a possible 6.5ish, so No to that one

BUT I did notice that the pressure gauge said 0. Goody, how do I repressurise the system? I know to turn the heating off before I start! I live on the ground floor in a flat, so not an air thing as all rads feel hot, not as hot as they should be but not patchy like air causes. There is no help in the manual for this one! All I can see to twiddle - and I did with no result - is the large white flat twisty thing underneath it. Yes, I am a girl, No I am not stupid in DIY, just lacking terms!

Thank you!

 

[workerant]

Is it like this?
http://www.youtube.com/watch?v=1Ea7czrQmsY

 

[zaleave]

Thank you so much, I think the white thingy in mine IS the key in the video! LOL. What a superb vid and I'll remember YouTube for info like that next time!

You are a star! Might need to get air out first, but that's the easy bit!

Have a great eve!