Hi,
I am planning to remove a gas flue box and brick up the opening (single brick wall downstairs, but a chimney on first floor and in loft). I plan to remove the box and the rough filled bricks around the box.
I was planning to put a prop either side with a needle at approximately where the cross is on the first picture (1 metre above the floor) , and then just brick up the hole.
The flue box is 350mm deep, so with props on 1 metre centres I should have enough room to maneuver the box out.
Would you use a prop in this situation?
I am planning to remove a gas flue box and brick up the opening (single brick wall downstairs, but a chimney on first floor and in loft). I plan to remove the box and the rough filled bricks around the box.
I was planning to put a prop either side with a needle at approximately where the cross is on the first picture (1 metre above the floor) , and then just brick up the hole.
The flue box is 350mm deep, so with props on 1 metre centres I should have enough room to maneuver the box out.
Would you use a prop in this situation?