am getting a bit of kettling on my boiler and have been told to get it flushed. do either of these products work sufficiently well?
x200 or x800?
- Thread starter duffin
- Start date
Sponsored Links
- Joined
- 21 Sep 2011
- Messages
- 4,748
- Reaction score
- 1,117
- Country
X200 is for scale and 800 for sludge, as a rule kettling is scale so I would try X200 first. It may take several weeks to work but the nice thing is you just leave it in there. If the problem persists use 800 but that needs flushing repeatedly afterwards.
X200 is a good product but often you think it is not working then suddenly realise it's gone quiet
Edit sorry Made a typo with X100 now rectified hope it didn't cause confusion
X200 is a good product but often you think it is not working then suddenly realise it's gone quiet
Edit sorry Made a typo with X100 now rectified hope it didn't cause confusion
many thanks to both of you.
Sponsored Links
but X200 you leave in, and X800/X400 you drain out after cleaning.
If it is an old vented system, it would most likely benefit from a clean with X800 or X400, then a flush out, and add X200 and X100 on final refill.
If it is an old vented system, it would most likely benefit from a clean with X800 or X400, then a flush out, and add X200 and X100 on final refill.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
