- Joined
- 5 Nov 2019
- Messages
- 46
- Reaction score
- 1
- Country
Morning all,
I have recently moved into a new house and have been trying to get the hot water and heating working with no success. Below are my findings so far:
1983 house with Y plan heating system upgrading in 2010 to a Worster boiler.
Boiler when powered on has solid blue light (therefore from my research doesn't have any faults)
The wireless thermostat is successfully turning the relay on and off.
Everything has power (3 way valve, cylinder stat etc) apart from the pump.
Everything is wired back into the old junction box apart from the pump which is wired back into the boiler - which I believe is the norm for new boilers?
So no matter what I set it to I cannot get the boiler to attempt to ignite not power to the pump. Any ideas?
Many thanks, Rob
I have recently moved into a new house and have been trying to get the hot water and heating working with no success. Below are my findings so far:
1983 house with Y plan heating system upgrading in 2010 to a Worster boiler.
Boiler when powered on has solid blue light (therefore from my research doesn't have any faults)
The wireless thermostat is successfully turning the relay on and off.
Everything has power (3 way valve, cylinder stat etc) apart from the pump.
Everything is wired back into the old junction box apart from the pump which is wired back into the boiler - which I believe is the norm for new boilers?
So no matter what I set it to I cannot get the boiler to attempt to ignite not power to the pump. Any ideas?
Many thanks, Rob