- Joined
- 25 Jan 2021
- Messages
- 2
- Reaction score
- 0
- Country
Hi,
I have a Yale 6400 and until now everything has been ok.
In the early hours 2 days ago, the panel started beeping rapidly, then stopped, then started beeping again. There was no fault showing but it was asking for the P code, which when entered did nothing. After about 15 minutes of this beeping going on and off, it stopped.
As I said, there was no fault showing.
The alarm seems to be working as normal otherwise.
I did take a video of this but I don't think I can post here?
In the early hours of this morning, it happened again twice. Again there was no fault showing and on the first occasion the buttons were doing nothing.
I unplugged the power and the phone line and it went to the usual fault beeping every 40 seconds or so. I replugged it back in and went back to bed.
Then it happened again a few hours later, the buttons worked this time but to no effect.
Eventually it stopped.
I have just spoken to Yale and they said I need a new control panel at £96.
It seems strange that it only happens during the early hours!
My control panel is in a cupboard under the stairs and I have recently had a smart meter installed there. Would that interfere?
If anyone has any ideas regarding resolving this problem, I would be very grateful otherwise I shall shut it down to get a solid nights sleep tonight!
I have a Yale 6400 and until now everything has been ok.
In the early hours 2 days ago, the panel started beeping rapidly, then stopped, then started beeping again. There was no fault showing but it was asking for the P code, which when entered did nothing. After about 15 minutes of this beeping going on and off, it stopped.
As I said, there was no fault showing.
The alarm seems to be working as normal otherwise.
I did take a video of this but I don't think I can post here?
In the early hours of this morning, it happened again twice. Again there was no fault showing and on the first occasion the buttons were doing nothing.
I unplugged the power and the phone line and it went to the usual fault beeping every 40 seconds or so. I replugged it back in and went back to bed.
Then it happened again a few hours later, the buttons worked this time but to no effect.
Eventually it stopped.
I have just spoken to Yale and they said I need a new control panel at £96.
It seems strange that it only happens during the early hours!
My control panel is in a cupboard under the stairs and I have recently had a smart meter installed there. Would that interfere?
If anyone has any ideas regarding resolving this problem, I would be very grateful otherwise I shall shut it down to get a solid nights sleep tonight!