Yale HSA 6400 alarm system

Joined
1 Sep 2016
Messages
2
Reaction score
0
Country
United Kingdom
Hi installed a Yale HSA 6400 alarm system on April 2016 .Everything was fine. Two days ago the control panel beep every 30 seconds and the amber (yellow ) light is lit. Any message on the panel need to change battery. Check the door contact and PIR fine . Alarm working fine. I disconnect the power for few minutes and power on still a amber on panel. Please help.
Regard
Joe
29/12/2017
 
Sponsored Links
i sort i out .Because the PIR battery. On the control panel:
Press the
pr
key and enter a user PIN code
followed by
3
.
2
The control unit is now in programming mode,
Select Devices +/-, then Program Siren and
Siren Tamp. Off using the
pq
3
keys.
3
Press
3
when in the Siren Tamp. Off menu
and the control unit will beep followed by an
acknowledgement pip from the siren.
Then change the new battery . After that reactive the tamper mode . The exit
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top