- Joined
- 24 Jan 2005
- Messages
- 51
- Reaction score
- 3
- Country
I replaced my cloakroom sink and loo two weeks ago. I removed the old and installed the new. The position changed for the sink very slightly, so I renewed the pipework over about 1 and a half metres, I used copper pipe and compression fittings in the main and 2 speedfit elbows as these were out of sight. The sink runs fine etc. But the water is an odd yellowy colour, it runs clear, then yellow then clear again and stays like it. This is only since the new sink. To get the same effect the sink must be left several hours. I assume somesort of corrosion in the pipework, but am unsure.
Any ideas ?
Ta
Andy
Any ideas ?
Ta
Andy