zanussi aquacycle 1200 drum stll turns but grating sound coming from the bottom of the drum, will wash but wont spin.
how do i get in to the drum,there are no acsess panels
On these machines the cabinet is split down the middle and you need to take the back half off for access. Take the lid off and you will see 2 screws on the top edge each side. There are also screws near the bottom rearcorners and screws concealed with plastic plugs at the bottom of both sides. Remove all these screws and unclip the water inlet extension assembly before pulling the back off. If there is something stuck in the drum you can often extract it through the hole for the heater element.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local