Hello. I have recently been given a Zanussi FL 1032 which I use on a cold feed only using a Y connector so both the hot and cold pipes take cold water.
When I use programs that ask for hot or hot and cold water both filler pipes seem to take water fine. However when I try to use the low temperature washes (cold water only fills) no water goes into the machine.
It seems to drain ok.
The machine worked fine for 2 washes then stopped.
Any ideas gratefully received.
Hope this is enough information.
Ta
When I use programs that ask for hot or hot and cold water both filler pipes seem to take water fine. However when I try to use the low temperature washes (cold water only fills) no water goes into the machine.
It seems to drain ok.
The machine worked fine for 2 washes then stopped.
Any ideas gratefully received.
Hope this is enough information.
Ta