just changed pump. just about working. does't complete wash cycle but continues sometimes when start or skip pressed. seems slower than before. clothes smelly. perhaps got damaged when upside down for repair? Any ideas and/or tips?
next stage is to do a couple of service washes ,
run on 95'c 1 litre vinegar & drop of bleach . but with no washing in
maybe a drop of bleach on a dish cloth and run it all around the grey door seal too
Hi Cakeman,
Washed with 1lt vinegar, then washed with 1lt bleach then washed out without any add. to clear. Slightly off of your tip.
Will pass on result. Thanks for reply.
Is the sluggish turning significant to you?
P
next stage is to do a couple of service washes ,
run on 95'c 1 litre vinegar & drop of bleach . but with no washing in
maybe a drop of bleach on a dish cloth and run it all around the grey door seal too
Well after a 3 or 4 service washes you'll at least clear the gunge.
could also be a bearing seal failure and leak
look at the back by the drum pulley , is there brown dirt there , starting from the centre bolt
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local