zanussi jetsystem turbo wash/dryer 1200

[pault4567]

just changed pump. just about working. does't complete wash cycle but continues sometimes when start or skip pressed. seems slower than before. clothes smelly. perhaps got damaged when upside down for repair? Any ideas and/or tips?

 

[cakeman]

next stage is to do a couple of service washes ,
run on 95'c 1 litre vinegar & drop of bleach . but with no washing in
maybe a drop of bleach on a dish cloth and run it all around the grey door seal too

 

[pault4567]

Hi Cakeman,
Washed with 1lt vinegar, then washed with 1lt bleach then washed out without any add. to clear. Slightly off of your tip.
Will pass on result. Thanks for reply.
Is the sluggish turning significant to you?
P

next stage is to do a couple of service washes ,
run on 95'c 1 litre vinegar & drop of bleach . but with no washing in
maybe a drop of bleach on a dish cloth and run it all around the grey door seal too

 

[cakeman]

Well after a 3 or 4 service washes you'll at least clear the gunge.
could also be a bearing seal failure and leak
look at the back by the drum pulley , is there brown dirt there , starting from the centre bolt