zanussi timeline 1600 replace main drum bearing - do I have to remove the whole inner unit, ie take drum out of the body / door seal etc
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
zanussi timeline 1600 replace main drum bearing
- Thread starter MicDor
- Start date
Posting PNC's help us to identify the machine correctly as you have different parts even on the same models depending on when they were made.
Generally you have to strip down a machine to do the bearings as you have to remove the inner drum which requires splitting the outer drum and removal of the door boot.
Depends how bad the bearings are they can be easy or swines to remove. You will need to check the drum support shaft (spider) as well for wear or corrosion.
Generally you have to strip down a machine to do the bearings as you have to remove the inner drum which requires splitting the outer drum and removal of the door boot.
Depends how bad the bearings are they can be easy or swines to remove. You will need to check the drum support shaft (spider) as well for wear or corrosion.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
