Hi all
We have an integrated washing machine, probably about 5 years old.
A few weeks back I levelled the feet and got it straight as it was rocking around with a heavy load and it’s been fine until recently. Now when we put a load in the drum fills with water and the machine tries to spin very fast straight away instead of working up the drum speed it wants to throw it around really fast, this causes the machine to bang around to the point that it walks itself out from under the worktop.
Sometimes it will spin then the drum suddenly stops and starts spinning the other way, like it’s struggling to spin one direction so suddenly stops and changes direction?
For example right now it’s sat on a cycle, there is water in there and it’s doing nothing it will be like this for a few minutes then all of a sudden it will try to spin really fast causing the machine to go mental and rock around the place.
Cleaned the filter out a couple of months back.
Any help would be great, I’m ready to kick the sh*t out of it.
We have an integrated washing machine, probably about 5 years old.
A few weeks back I levelled the feet and got it straight as it was rocking around with a heavy load and it’s been fine until recently. Now when we put a load in the drum fills with water and the machine tries to spin very fast straight away instead of working up the drum speed it wants to throw it around really fast, this causes the machine to bang around to the point that it walks itself out from under the worktop.
Sometimes it will spin then the drum suddenly stops and starts spinning the other way, like it’s struggling to spin one direction so suddenly stops and changes direction?
For example right now it’s sat on a cycle, there is water in there and it’s doing nothing it will be like this for a few minutes then all of a sudden it will try to spin really fast causing the machine to go mental and rock around the place.
Cleaned the filter out a couple of months back.
Any help would be great, I’m ready to kick the sh*t out of it.
