Hi guys
I was an engineer many years ago and a friend asked me to look at this machine.
The door lock wasn't working so I fitted a new one and when I tested the machine with the lock in my hand it started filling. When fitted the machine wouldn't start and the lock is again not working.
there are 4 lights on the front in a row, the left hand one is the start button, this now will not work but all other lights do. If I press and hold the start button the 2nd light comes on but the machine will not start due to the door not locking.
At the door switch I only have 175 volts or there abouts.
I am thinking it is the front circuit board but if there is an engineer who could point me in the right direction it would be much appreciated.
All input appreciated
I was an engineer many years ago and a friend asked me to look at this machine.
The door lock wasn't working so I fitted a new one and when I tested the machine with the lock in my hand it started filling. When fitted the machine wouldn't start and the lock is again not working.
there are 4 lights on the front in a row, the left hand one is the start button, this now will not work but all other lights do. If I press and hold the start button the 2nd light comes on but the machine will not start due to the door not locking.
At the door switch I only have 175 volts or there abouts.
I am thinking it is the front circuit board but if there is an engineer who could point me in the right direction it would be much appreciated.
All input appreciated