New profile posts

just to confirm, the boiler control panel is stuck on 10 " so neither water or heating.
would you still say pump ?
thanks in advance.
sam

hi, hoping you can help.
my heatline caprizi 28
has no heating. the control panel mode is on radiator symbol and its temp display is locked at 10
it seems to be trying to work as i hear the pipes gurgle.
i,ve just come out of hospital and would love any assistance... if you can.
many thanks in advance.
samantha

Ideal Icos HE12 Boiler - PCB advice

Our Ideal Icos HE12 Boiler PCB (black in colour Part Ref: 174 486) had gone faulty and need replacement.
All I found on website is PCB of Orange colour.
Is it compatible? Please advice.
Thank you in advance.

My front door sill was holding water so the builder has drilled a row of additional holes at the front of the sill to help with the draining of water. My question is is that okay to do!?

Stuck....again

Hi burnerman got a problem with a greenstar heatslave with riello burner the boiler pump runs but the burner wont kick in its flashing red if i reset it it flashes red and green and then goes back flashing red ive another burner but the control had gone on that so ive swapped controller over onto old boiler and still getting same fault what could you suggest the controller has gone or something else ? Thanks

did you find out your beading??

Did you ever repair your boiler flue? I have the same issue with a Potterton Kingfisher MF. It works really well and have been making repairs for over 15 years, but the flue could be the next thing that would work more efficiently.

H Mark. Do you still check this forum? Im wondering if I can ask you about this post: https://www.diynot.com/diy/threads/single-pipe-system-poor-flow-through-rads.303135/
As I have the exact same issue right now.

Hello Peter. Are you Peter Nolan? From Tony Glazier!

Hello,
Any chance you could let me know what you did with the basement flat floor in the end?
Have the exact same situation. Considering limecrete with ASHP + UFH. Bodge job of waterproofing performed historically with membranes approx 1.5m above the floor level. A couple of the walls retaining soil.
Thanks in advance..

This section will go into more depth on batteries in parallel vs series. The purpose of this section is to explain why certain connections are utilized, how to set up to your desired connection, as well as going over what is the most beneficial connection to utilize based on your situation.

Drayton HTS3 cylinder thermostat - can anyone show me a wiring diagram for wiring up to a 2 port Honeywell zone valve.

Dodgy gas engineer stole my money

Ive had a new flue fitted to my baxi boiler. Just asking if the engineer was suppose to fill in the holes. He didn’t and left gaping holes