- Joined
- 27 Mar 2007
- Messages
- 17
- Reaction score
- 0
- Country
I have a Gledhill Pulsacoil 3 Thermal store which is not working as it should. The heat source is direct by 2 immersions. They are doing what they should and the primary side is functioning correctly.
The water drawn off at the tap is cold. The flow sensor is working having conducted a continuity test. The circulation pump is also working having bridged the power supply. So the problem is the electronics on the PCB which needs replacing.
The problem is Gledhill have gone into administration as of last week. I need to source the pcb, (PSC 08/99/07325).
Has anyone any ideas on what to do regarding Gledhill spares?
The poor women who lives there has 3 month old twins and no hot water
All thoughts gratefully received.
The water drawn off at the tap is cold. The flow sensor is working having conducted a continuity test. The circulation pump is also working having bridged the power supply. So the problem is the electronics on the PCB which needs replacing.
The problem is Gledhill have gone into administration as of last week. I need to source the pcb, (PSC 08/99/07325).
Has anyone any ideas on what to do regarding Gledhill spares?
The poor women who lives there has 3 month old twins and no hot water
All thoughts gratefully received.