gas pipework

[ringy1]

hi i want to put a gas cooker in my kitchen and the gas boiler is in the kitchen so when i turn off the gas at the meter and cut in the gas pipe in the kitchen how do i purge out any gas thats left in the pipework before i solder in a tee. can anyone help thanks

 

[fazedup71]

laughing one born every minute! you need a RGI

 

[ringy1]

including you, instanter tee it is so

 

[fazedup71]

no you are, am a RGI and your plain taking the **** asking that!

 

[ringy1]

instanter tee it is so

 

[fazedup71]

if an installer is going to T in he will purge the pipework for you, but you will also need him to fit the cooker. it does state in your post that you are cutting into the pipe work, hence my reply

 

[mogget]

instanter tee it is so

I don't suppose someone could translate that for me?

 

[fazedup71]

instanter tee it is so

I don't suppose someone could translate that for me?

rough translation me is going to attempt to blow myself up this afternoon!

 

[namsag]

Fazed.
Out of interest how is this installer going to purge the pipework????

 

[fazedup71]

 

[ringy1]

and go on we are getting there slowly but surely?

 

[fazedup71]

Fazed.
Out of interest how is this installer going to purge the pipework????

I originally read the post wrong and thought OP meant once the pipework had been completed, once i read it a few times i realised my error. Am not going to tell OP how to purge tho! I have edited my answer about the meter too as I am telling the OP far to much

 

[seco services]

I have edited my answer about the meter too as I am telling the OP far to much

he'll find out of the net anyway.

you've already told him to disconnect it from the meter.

 

[ringy1]

yea purge rig when the installation is done, but what i asked is before i solder in the tee how do i release the gas left in the pipework can any one else help please

 

[seco services]

are you blind its right in front of ya.