hi guys - need some advice on a gardtec system.
The keypad had recently developed a fault on the display - cannot see any characters on the lcd. Last week the alarm started sounding. I had to disconnect the sounder to get it stopped.
Now, the control panel is a gardetec 800 series. I intend to replace the RKP with a matching device - have found the item on ebay.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEBIDX:IT&item=230342174618
Are there any compatibility issues ? This should be a matter of hooking up the new RKP, resetting to factory defaults and reprogramming the zones etc - right ?
The keypad had recently developed a fault on the display - cannot see any characters on the lcd. Last week the alarm started sounding. I had to disconnect the sounder to get it stopped.
Now, the control panel is a gardetec 800 series. I intend to replace the RKP with a matching device - have found the item on ebay.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEBIDX:IT&item=230342174618
Are there any compatibility issues ? This should be a matter of hooking up the new RKP, resetting to factory defaults and reprogramming the zones etc - right ?
Links in this post may contain affiliate links for which DIYnot may be compensated.