Hi All
I have a potterton suprima 50 (I know please dont say it) it was here when I moved in.
It has stopped igniting, I have tried a new PCB with no effect.
It is drawing gas, the fan is running, and its trying to ignite (but no spark)
I have put a test meter on the wires going to the spark ignitor and have power when its supposed have.
Now the other side of the spark ignitor you have the wire going to the electrode.
If I put my multi meter on the electrode wire and the other to earth I get a zero reading.
Have I tested this correctly and would you agree it needs a new spark ignitor.
Any help much appreciated
Andy
I have a potterton suprima 50 (I know please dont say it) it was here when I moved in.
It has stopped igniting, I have tried a new PCB with no effect.
It is drawing gas, the fan is running, and its trying to ignite (but no spark)
I have put a test meter on the wires going to the spark ignitor and have power when its supposed have.
Now the other side of the spark ignitor you have the wire going to the electrode.
If I put my multi meter on the electrode wire and the other to earth I get a zero reading.
Have I tested this correctly and would you agree it needs a new spark ignitor.
Any help much appreciated
Andy