I have a light in the hall that was controlled by a switch there and on the upstairs landing. The switches were old bakerlite ones with black and red wiring, they were swapped for new ones but now the light only works when the upstairs switch is in the on position whereas it used to work both ways. I am stuck on how to rewire it, I have looked through the stickies but still not sure. Wires with no switches connected are
Downstairs-
Black is 12v
Red is 12v
Blk/Red is 0 twisted together
Upstairs
Red is 12v
Black is 12v
Red is 12v
So what goes where, switches both have
1 way
2 way
Common
Can anyone explain?
Downstairs-
Black is 12v
Red is 12v
Blk/Red is 0 twisted together
Upstairs
Red is 12v
Black is 12v
Red is 12v
So what goes where, switches both have
1 way
2 way
Common
Can anyone explain?