Bodger bodges packing Bosch PMF 180 E Multi

[mrbodge]

I call this the Jesus Saw. It does so many things that would have saved me so many hours in the past I am both thrilled and horrified.

Anyway, I have a problem with packing tools into their nice little tool boxes properly. Have got quite a few attachments for this one, anyone got a photo of how they pack theirs to save damaging my lovely expensive bits and bobs.

 

[PrenticeBoyofDerry]

Anyway, I have a problem with packing tools anyone got a photo of how they pack theirs to save damaging my lovely expensive bits and bobs.

One of these

Untitled

• PrenticeBoyofDerry
• 7 May 2010
• 1

 

[muggles]

I've got the GOP 10.8v battery version of this. Bizarrely enough, I keep it in the box it was supplied in, along with all the various accessories...

 

[seaangler]

the gop does come in a carry case - the pmf doesnt !!

but i dont see why you shouldnt be able to buy a gop box , and i'm sure the pmf would fit in it

 

[mrbodge]

Anyway, I have a problem with packing tools anyone got a photo of how they pack theirs to save damaging my lovely expensive bits and bobs.

One of these

Untitled

• PrenticeBoyofDerry
• 7 May 2010
• 1

What IS that?

 

[muggles]

Anyway, I have a problem with packing tools anyone got a photo of how they pack theirs to save damaging my lovely expensive bits and bobs.

One of these

Untitled

• PrenticeBoyofDerry
• 7 May 2010
• 1

What IS that?

It's a box

 

[PrenticeBoyofDerry]

Anyway, I have a problem with packing tools anyone got a photo of how they pack theirs to save damaging my lovely expensive bits and bobs.

One of these

Untitled

• PrenticeBoyofDerry
• 7 May 2010
• 1

What IS that?

It's a box to protect your crown jewels

 

[foxhole]

Mine came boxed in a carry case.?

 

[big-all]

in the box mine came in i removed lots off partition bits
and what used to contain the machine 2 batts 1 charger bit box 2 blades sanding pads
now contains
the machine 6 batts 1 charger 2 bit box 13 blades 5x the sanding pads
impact driver one speed drill driver 2 speed drill driver angle driver a 5m tape and the torch

infact the whole 10.8v kit except the tin snips