help needed - Part2

[Dan Robinson]

You MUST use the extra vessel.


How many log ons do you have here?

 

[mandm65]

Thanks guys for your help, much appreciated, have told the muppert that he needs to install the vessel, he has not spoken to me since!
As for the How many log ons do I have here? Well technically one but evidently not, i used old tablet while on the move to post so guess it must have some old log ons stored!

Please keep an eye on this thread as i would seek further help if i were to face a new challenge.

 

[Dan Robinson]

Good good.

Vaillant boilers are renowned for needing extra expansion capacity.


Not sure why I he is being funny. Perhaps it's because he is being told what to do by proxy from an Internet forum.

 

[mandm65]

Right here is the evidence of muppet at work, can i have your input pls, as do i need to be concerned boiler close to cylinder and the UFH pipes are not straight?

Untitled

• mandm65
• 4 Sep 2014
• 1

Untitled

• mandm65
• 4 Sep 2014
• 1

 

[Dan Robinson]

Difficult to be fair judging from pictures like that. However, can one remove the front panel be removed from the boiler?

If yes then it is OK. Hardly a work of art though. But then we can't see the full situation.

 

[mandm65]

Difficult to be fair judging from pictures like that. However, can one remove the front panel be removed from the boiler?

I guess your concern probably related to servicing the boiler so definitely worth checking.
I am currently away from home for the project so will ask mrs M to check that out.

i guess its accpetable for UFH pipes not to be staright?

 

[mandm65]

Dan, here are the expansion vessels, you can see that he has mounted the expansion vessels for the boiler.

Untitled

• mandm65
• 4 Sep 2014
• 2

 

[Dan Robinson]

They don't have to be straight but shouldn't be stressed or kinked.

 

[picasso]

Gonna be fun checking the pressure on those in a couple of years time, get the ejit to drop them down a bit.

 

[mandm65]

Thanks for your input mate, much appreciated.