Loft scheme / drawing - brainstorm ideas needed please

Joined
17 Apr 2015
Messages
2
Reaction score
0
Country
United Kingdom
Hi

I am converting my loft on a 3 bed ex council property in London. The architect has suggested some ideas and I wanted people's view on things.

One of the problems I have right now is that the current staircase is quite wide (930mm) and has a very gentle incline. This causes a slope in one of the bedrooms (top left).

What I have tasked the architect is to solve that problem as well as provide loft access.. at the minute there is a ladder access.

Please note it is a tunneled house with shared access so where the stairs come in from ground to first.. is the border on the ground floor but there is additional space to use on the 1st floor as can be seen in the drawings above the tunnel (which currently has ladder access but only 600mm). There is also the possibility of moving the ground floor stairs further to the right by maybe 30/40 mm.

Please feel free to suggest ideas for access.. and also what to do in the loft. One master + en suite or two beds + washroom. At the minute the washroom in the loft is not technically en suite but I am thinking i will have double doors so it is an en suite + access from landing so also a general bathroom. That door could be locked to make it en suite etc. Is it a good idea?

the dropbox link to file since measurements get distorted in the image: https://www.dropbox.com/s/wq8tqr739d2jdwv/Schemes 3.pdf?dl=0
 
Option 1 in the pink and option 3 in the grey

Consider that the pink seems to be a master bedroom so make its em suite a little bigger, there's certainly enough bedroom to go round. I've never understood either why architects insist on design minuscule bathrooms that will only be used by one person or a couple and then having the door open into the tiny space such that it's liek a crystal maze challenge getting to the bog. Have the door open into the room means the design can be compact, but with a good amount of standing space for post shower etc
 
Ps you're paying an architect for ideas, you don't need ours (as any architect will tell you we are lower creatures, architectural technicians like FMT and ordinary berks in the street who know a bit about 3 D modelling, like me) surely?
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top