Hi everyone!
I need a contactor/relay but I'm really stuck!
This is my situation:
I have a solar inverter, mains, and my office. I want both the solar and mains to power the office (but ofcourse not at the same time). I want the contactor to do the following:
If the solar inverter is supplying 240v, then power the office using this, if not, power the office with mains.
This is my understanding:
I also need solar L, N and E on the NO terminals.
I need mains L, N and E on the NC terminals.
Where will the 3 output terminals go?
I have a contactor here by Schneider electric, model number CAD32. How can I wire this up to do what I need?
Thanks in advance, Antony!
I need a contactor/relay but I'm really stuck!
This is my situation:
I have a solar inverter, mains, and my office. I want both the solar and mains to power the office (but ofcourse not at the same time). I want the contactor to do the following:
If the solar inverter is supplying 240v, then power the office using this, if not, power the office with mains.
This is my understanding:
- I need a 240v contactor.
- The contactor needs a 240v coil.
- The contactor needs 3 output terminals?
- It needs 3 input NO terminals.
- It needs 3 input NC terminals.
I also need solar L, N and E on the NO terminals.
I need mains L, N and E on the NC terminals.
Where will the 3 output terminals go?
I have a contactor here by Schneider electric, model number CAD32. How can I wire this up to do what I need?
Thanks in advance, Antony!