Worcester Greenstar 30si fault light flashing, no burner light

[bethrob99]

CH was working fine this morning but this evening it refuses to turn on. I have tried using the reset button but each time fault light starts flashing rapidly. Any ideas please?

 

[AGAS]

you need a repair engineer , sounds like it could be expensive as well

 

[bethrob99]

It usually is an expensive repair. Worst thing I ever did getting this pile of rubbish fitted. I think I've replaced all major components already

 

[AGAS]

I think I've replaced all major components already

it could be one more I'm afraid get someone in to have a look because you won't be able to fix it

 

[bethrob99]

Thanks AGAS. What do you suspect is the culprit this time?

 

[Stadan20]

This time of year I'm guessing ignition fault due to a certain blockage , but I may be wrong

 

[bethrob99]

When I manage to get an engineer out (of course these things always happen out of hours) I'll come back with the result

 

[gigz]

Have you checked no-ones turned the gas off at the meter ?

 

[Stadan20]

Where does your condense discharge ?

 

[bethrob99]

It was the fan - £160 + £50 fitting. So glad to have a working system again