Hey when screwing in the screws to screw the socket cover to the back box they screw in but don't nip up tight. So I wonder if the threads could be knackered? The back box and sockets are 20 years all the screws are new ones needed to be longer as are tiled behind. Any advice?
Screws for screwing socket cover to back box
- Thread starter Fallout
- Start date
Sponsored Links
- Joined
- 28 Apr 2004
- Messages
- 7,459
- Reaction score
- 680
- Country
Might be stripped threads, you can buy rethreaders (3.5mm taps) from any wholesaler or screw fix etc, or possibly they might be a bit short, long screws available from same places
- Joined
- 17 Aug 2010
- Messages
- 2,739
- Reaction score
- 452
- Country
However if the threads are stripped you would need to do something like squash the hole using pliers first.
If all else fails araldite a 3.5mm nut to the back of the lug.
If all else fails araldite a 3.5mm nut to the back of the lug.
Sponsored Links
How much are re threaders
One.
They also sell individual 20mm grommets for 30p each.
What are the grommets?
Never
Never Seen one of these before look great!
Round black things that fit into the 20mm holes in the metal backbox, to prevent the cables being damaged.
Typically about £2 for a box of 100.
Yes, just make sure it goes through the hole straight and level.
The same tool can be used to clean up existing threads, as even some new boxes have rather manky threads which don't take screws easily.
Thanks I don't need them
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
