- Joined
- 20 Aug 2016
- Messages
- 5
- Reaction score
- 0
- Country
I have 4 concrete posts (7ft 9in to fit a 6ft fence Panel) to put in, but one needs to go roughly in the middle of a paving slab which also acts as a base for a Keter shed (plastic base).
Would I take the slab up, dig the hole and fit the post and then try and cut the slab to fit back back in place and under the shed.
Or could I cut a hole big enough for the post through the existing slab without disturbing the shed?.
I would probably crack the slab as I have not done this before anyway.
New to this so might be way off the mark with my thoughts!.
Thanks for any info.
Would I take the slab up, dig the hole and fit the post and then try and cut the slab to fit back back in place and under the shed.
Or could I cut a hole big enough for the post through the existing slab without disturbing the shed?.
I would probably crack the slab as I have not done this before anyway.
New to this so might be way off the mark with my thoughts!.
Thanks for any info.