Hi - just realised I need a bigger hot water tank and bigger cold water tank to service our new mixer shower. This has now pushed us into the the realms of fitting a unvented cylinder instead.
However, the mains water feed into our house is only 15mm with a flow rate of approx 12lm out of the kitchen tap and a static pressure of 3 bar.
Is this good enough to run an unvented cylinder and still get a decent flow out of the mixer shower ?
Cheers.
However, the mains water feed into our house is only 15mm with a flow rate of approx 12lm out of the kitchen tap and a static pressure of 3 bar.
Is this good enough to run an unvented cylinder and still get a decent flow out of the mixer shower ?
Cheers.