- Joined
- 26 Aug 2016
- Messages
- 6,833
- Reaction score
- 1,010
- Country
Here's a new one, not sure if it's a DIY disaster or electrics!
Our cu and cutout are under the stars on the party wall. i was going upstairs with a big glass of water on a tray, tripped over and spilt the lot. All the water ran towards that side straight through the gaps funneling down onto the gear.
I switched off the main isolator and dried inside the cu, but the cutout was soaked.
All ended well, but I'd certainly not considered the risk of spillage when siting the cu and using the top entry.
Our cu and cutout are under the stars on the party wall. i was going upstairs with a big glass of water on a tray, tripped over and spilt the lot. All the water ran towards that side straight through the gaps funneling down onto the gear.
I switched off the main isolator and dried inside the cu, but the cutout was soaked.
All ended well, but I'd certainly not considered the risk of spillage when siting the cu and using the top entry.