Trying to age a 70’s house by building a bay window on the frony

Status
Not open for further replies.
Joined
17 May 2015
Messages
94
Reaction score
3
Location
Bedfordshire
Country
United Kingdom
Hi all,

We just bought a house that’s the only modern one in the road. It’s basically a horrid 70’s job.
I want to ‘age’ it... I’m thinking of a bay window made out if block work and rendered.

couple of questions for you pros.

a) building application needed?
B) straightforward job?
C) cost?

I’m effectively removing the upvc and building on the front... rendered window and then put some brick tiles on it to again give it more authenticity...

Any thoughts please let me know.
Cheers
Mark
 
Sponsored Links
A few stained brown planks and that will age it 500 years :cautious:

Adding a bay may WTF it rather than "age" it.
 
Sponsored Links
Planning permission definitely required- construction forward of the principal elevation. Building regs as well. Straighforward after that (though beware of buried services in the front garden), £2000 upwards depending on how fancy a roof you want on it and what sort of deal you can get on the windows.
If you live in a street with lots of proper bay windows then you'd be best going for quite a decorative roof (lots of mouldings) rather than just a flattie (there's one on my street, it looks rubbish, I'll attach a pic in the morning). You can get GRP moulded pre-insulated ready to go bay rooves, think they're about £500.
EDIT This assumes you've already got a window in the room the same width as the bay will be. If you haven't then add another grand for new lintel and associated making good
 
Thanks guys- sorry for late reply...VE Day and birthday...

here’s a pic of the front. I hate how it looks right now! You can see the neo Georgian bay window - yuk!
9EA0E8E0-F86D-404A-BD7A-CBBED2139A22.png
 
Get rid of the fake bar glazing and the front door with fake fanlight and the fake pillars . And the fake shutters . Then consider cladding the top half with cedral cement board ( there is an article on here about it. Ah, the bay- maybe it could be bricked up off a small footing to the underside, it would look better then. Proper bricks not slips.
 
Get rid of the fake bar glazing and the front door with fake fanlight and the fake pillars . And the fake shutters . Then consider cladding the top half with cedral cement board ( there is an article on here about it. Ah, the bay- maybe it could be bricked up off a small footing to the underside, it would look better then. Proper bricks not slips.

I was thinking upper half brick slips, lower half block work and screeded and then painted white (maintenance wise long term makes sense as I intend to leave the house in a casket and we all get to a ton in the family genes so want ease of maintenance) As next door to the right is fully white (looks like a Victorian cottage, and left is a fully brick Victorian detached cottage it ties the two in to our house, rather than it looking like an imposter!
 
I was thinking upper half brick slips, lower half block work and screeded and then painted white (maintenance wise long term makes sense as I intend to leave the house in a casket and we all get to a ton in the family genes so want ease of maintenance) As next door to the right is fully white (looks like a Victorian cottage, and left is a fully brick Victorian detached cottage it ties the two in to our house, rather than it looking like an imposter!
You mean a double height bay , over the bedroom window too ? I was thinking leaving the existing as is and bricking up under it . The cladding of 1st floor would add horizontal lines to "widen" the face.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Status
Not open for further replies.
Sponsored Links
Back
Top