Concealed cisterns

Joined
16 Jul 2009
Messages
911
Reaction score
6
Location
Hull
Country
United Kingdom
Anyone had much to do with the toilet concealed cisterns were the panels aren't removed by pulling upwards. But you have to remove the toilet as the panel is removed by pulling forward. Is there a trick to getting the flush pipes to stay rigid in place as pushed back. As you cant get in to hold it etc as the panel is already fixed before pushing the toilet back. Obviously the waste outlet is on a flexi.
 
Sponsored Links
What a stupid design they are. Have had to fit timber support behind the flush pipe ( vertical section) to prevent strain on the cistern,and keep the flush pipe rigid. One I did came with a metal clamp and bracket ,but can't remember what make it was ,and haven't seen one like it since !
 
Anyone had much to do with the toilet concealed cisterns were the panels aren't removed by pulling upwards. But you have to remove the toilet as the panel is removed by pulling forward. Is there a trick to getting the flush pipes to stay rigid in place as pushed back. As you cant get in to hold it etc as the panel is already fixed before pushing the toilet back. Obviously the waste outlet is on a flexi.

I don't fit them like that now when I come across them, as suggested such a bad design. I take the front panel off and now have a pack of drop on clips in my gear. I've even made up wooden wedges before now so the panel can be slid down. Once I used mirror screws, that was before I figured out making the wedges up could work.

I take it you cant get your hand down the gap in between the panel and the front of the cistern?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top