- Joined
- 30 Dec 2020
- Messages
- 9
- Reaction score
- 0
- Country
Hi to all . I wonder if anyone can advise me please.
I have Danfoss heat exchange setup in my flat . All the flats are heated by a communal boiler in the basement. The hot water is on demand and is not a problem .
The heat exchanger has just got a normal power lead that plugs into the mains and is simply switched on and off via the switch on the plug socket. Not very efficient.
I would like to install a Hive type thermostat but as there is no existing programmer to replace I'm not sure how it should be connected. I have uploaded some pics of the wiring setup (the power lead is to the right )
Any help or advice would be greatly appreciated.
Happy new year to you all.
I have Danfoss heat exchange setup in my flat . All the flats are heated by a communal boiler in the basement. The hot water is on demand and is not a problem .
The heat exchanger has just got a normal power lead that plugs into the mains and is simply switched on and off via the switch on the plug socket. Not very efficient.
I would like to install a Hive type thermostat but as there is no existing programmer to replace I'm not sure how it should be connected. I have uploaded some pics of the wiring setup (the power lead is to the right )
Any help or advice would be greatly appreciated.
Happy new year to you all.