- Joined
- 20 Feb 2021
- Messages
- 15
- Reaction score
- 1
- Country
I'm planning to wire an office in the garden and one of the circuits from the CU will be a 1 way 3 gang light switch as per the image. I'm trying to work out what cable I'll need to use as the neutral goes directly to the ligth fittings (in the ceiling via conduit) but the phased to the 3 gang switch. This seems to rule out using 2 or 3 core and mean I need some suitably insulated single core to make it happen. Is this correct? Was thinking of 1.5mm.