Evolution mitre saw stand - preventing saw turning to 45 degrees

[Temmy]

Hey,

I've got an Evolution R210 SMS+ mitre saw attached to an evolution mitre stand. What I'm finding is the rails/clamps it's screwed to for the stand are preventing the saw locking into 45 degrees:

Video of the problem:

https://i.imgur.com/0E2edS6.mp4

Anyone had this issue before?

 

[big-all]

2 or three penny washer on every bolt to stop twisting

 

[Temmy]

Fixed it! It was because I had removed the rubber feet under the saw. This is unnecessary with this model, and doing so will lower it too far. Leave the base feet on and the turn handle will clear the stand rails just fine.

Hey,

I've got an Evolution R210 SMS+ mitre saw attached to an evolution mitre stand. What I'm finding is the rails/clamps it's screwed to for the stand are preventing the saw locking into 45 degrees:

Video of the problem:

https://i.imgur.com/0E2edS6.mp4

Anyone had this issue before?