Evolution mitre saw stand - preventing saw turning to 45 degrees

Joined
20 Sep 2010
Messages
93
Reaction score
1
Location
Cambridge
Country
United Kingdom
Hey,

I've got an Evolution R210 SMS+ mitre saw attached to an evolution mitre stand. What I'm finding is the rails/clamps it's screwed to for the stand are preventing the saw locking into 45 degrees:

mhGLHX7.jpg


Video of the problem:

https://i.imgur.com/0E2edS6.mp4

Anyone had this issue before?
 
Sponsored Links
Fixed it! It was because I had removed the rubber feet under the saw. This is unnecessary with this model, and doing so will lower it too far. Leave the base feet on and the turn handle will clear the stand rails just fine.

Hey,

I've got an Evolution R210 SMS+ mitre saw attached to an evolution mitre stand. What I'm finding is the rails/clamps it's screwed to for the stand are preventing the saw locking into 45 degrees:

mhGLHX7.jpg


Video of the problem:

https://i.imgur.com/0E2edS6.mp4

Anyone had this issue before?
 
Last edited:

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top