Hi, while getting a splashback in, a wire in the switch which turns the cabinet and plinth lighting on, has come loose, can someone please guide me on where it should go, many thanks, i am trying to attach the pic...with some difficulty
Wires come loose
- Thread starter Charn
- Start date
D
Deleted member 267285
What’s the difficulty?
- Joined
- 24 Oct 2020
- Messages
- 5,619
- Reaction score
- 2,052
- Country
Re picture
1 https://postimages.org/
2 Upload picture
3 Copy hotlink for forum (ignore the others)
4 Paste link here. Directly in thread. Don't need to touch anything here. Don't use any forum icons or settings. Works like magic
1 https://postimages.org/
2 Upload picture
3 Copy hotlink for forum (ignore the others)
4 Paste link here. Directly in thread. Don't need to touch anything here. Don't use any forum icons or settings. Works like magic
Just copy and paste pictures.
In the absence of a picture.
1/ Can you see the back of the switch?
2/ Are there any markings on the back of the switch? (e.g. Comm, L1, L2, Load, Feed etc)
4/ How many other wires are there?
5/ Can you indicate what position any other wires are occupying?
1/ Can you see the back of the switch?
2/ Are there any markings on the back of the switch? (e.g. Comm, L1, L2, Load, Feed etc)
4/ How many other wires are there?
5/ Can you indicate what position any other wires are occupying?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
