Best adhesive for wood to pre cast concrete to hold ladders

[Galey2000]

Hi all,

I am wanting to hang my ladders on the wall in the garage. I am trying to use adhesive to stick two lengths of wood vertically and the screw my ladder hangers onto them. This works, until I actually hang the ladders, within 24 hours the bloody things fall off taking the wood with them. Anybody got any recommendations for an adhesive that would hold this weight(triple set of ladders) please? I am looking at "sticks like sh*t turbo" but a bit fed up of repeating the job tbh

Thank You

Galey

 

[Harry Bloomfield]

Holes drilled in walls, screws and plugs..

 

[Galey2000]

Hi Harry, thanks for that. I can't sell into the precast concrete add it crumbles a bit even though it's only a few years old

 

[freddiemercurystwin]

Forget anything other than a mechanical fixing (ie screw & plug as mentioned) what are your walls made of? Got a photo?

 

[johnny2007]

Use a diamond core bit, the one for tiles.
Or a good bit without hammer action (bosch blue should do).

 

[Harry Bloomfield]

Hi Harry, thanks for that. I can't sell into the precast concrete add it crumbles a bit even though it's only a few years old

Well, glue is not strong enough and you risk them falling on you or family..

Needs photos, pre-cast doesn't normally crumble.

 

[johnny2007]

Erbauer Diamond Tile Drill Bit 8 x 80mm - Screwfix

Order online at Screwfix.com. Long life, fine diamond grit for a professional quality finish without chipping tiles. Easy to maintain, self-cooling and self-sharpening grit. Suitable for dry and wet cutting. FREE next day delivery available, free collection in 1 minute.

www.screwfix.com

 

[Galey2000]

 

[Galey2000]

Hi, this is the wall of the garage.?

 

[Galey2000]

 

[Galey2000]

...and these are my ladders

 

[Old Salt]

Undo a couple of the central bolts holding the panels together. Add a couple of brackets and redo the bolts.

 

[freddiemercurystwin]

Hang a couple of brackets off the roof beams.

 

[Galey2000]

Undo a couple of the central bolts holding the panels together. Add a couple of brackets and redo the bolts.

But won't the brackets be facing the wrong way?

 

[Old Salt]

Depends which type of brackets you use. Put them in a vice and twist them to shape. Where do you live I shall come and do it for you. Oh, hold on this is diy