I'm confused by this shower mixer!

[theflyingpig]

Er, I think I'm missing something here! Can anyone help?

I've got this Bristan 2 outlet shower mixer, but no installation manual. I can feel that one knob controls the temp, and the other is the diverter, so can tell which way up it goes.... So can deduce which outlet is which....
But, how to tell which inlet is cold /hot? Can see H/C on the faceplate so assume that also indicates which side to plumb which?

And finally, the head scratcher.... What is the FIFTH threaded connector at the bottom for?

 

[stem]

You can find the instructions for it here.

 

[theflyingpig]

You can find the instructions for it here.

Thanks.

No mention of the fifth outlet... You can see it in their diagrams though.... Presume I just cap it off....

 

[securespark]

Isn't there one outlet for a hose and another for an overhead?

 

[theflyingpig]

Isn't there one outlet for a hose and another for an overhead?

Yes, and a hot feed in, a cold feed in....
It's the 5th connection that's got me puzzled..

 

[cross thread]

I had one that also had a bath filler outlet

 

[theflyingpig]

I had one that also had a bath filler outlet

That would make sense if the diverter had three positions, but it's only got two.....

.

 

[cross thread]

The bottom is the diverter the top on off temperature

 

[theflyingpig]

Plumbed this in today so got to the bottom of it... The bottom outlet is active when the diverter is in the central position - where you would assume it was in the off position. I guess it is for a bath filler as @cross thread said, though the bath filler would need a tap... Odd in my view.... .

Anyhow, I'm just going to cap it off and use as a two way diverter.....