Hi as you can see i am new to this site and i have just bought my 1st table saw, nothing too spectaular but should be adequate for a bit of home DIY and a few small projects.
Its a Clarke CTS10C.
This saw has quite a small 'bed' if thats the correct term. what would be the best way of increasing this bed size so that i could use the saw to cut 8x4 sheets or rip down the side of a door for example.
Many thanks
Its a Clarke CTS10C.
This saw has quite a small 'bed' if thats the correct term. what would be the best way of increasing this bed size so that i could use the saw to cut 8x4 sheets or rip down the side of a door for example.
Many thanks