Two questions
1/ We have just had a new bathroom fitted a few months ago by an experienced plumber!
The hot water flow is very slow on the new hot water basin/tap. All the other flow levels for hot water, shower/bath and kitchen are ok and it was ok on this basin before new bathroom was fitted.
2/ In the same bathroom I have had to take off the half pedestal under the basin because the slider/lever for the waste fitting was broken. I have now fitted a pop up waste as this seems to be less hassle just in case the same fault occurs in the future.
I now cannot fit the half pedestal to the wall correctly and get everything lined up. As I fit the back screws on the L shaped bracket supplied and as fitted originally the front of the pedstal drops down about 1". I could fill with silicone but it does look unsightly.
Any help would be appreciated
1/ We have just had a new bathroom fitted a few months ago by an experienced plumber!
The hot water flow is very slow on the new hot water basin/tap. All the other flow levels for hot water, shower/bath and kitchen are ok and it was ok on this basin before new bathroom was fitted.
2/ In the same bathroom I have had to take off the half pedestal under the basin because the slider/lever for the waste fitting was broken. I have now fitted a pop up waste as this seems to be less hassle just in case the same fault occurs in the future.
I now cannot fit the half pedestal to the wall correctly and get everything lined up. As I fit the back screws on the L shaped bracket supplied and as fitted originally the front of the pedstal drops down about 1". I could fill with silicone but it does look unsightly.
Any help would be appreciated