Recent content by 2sppandey

Hello, I recently had a garage conversion done, the subfloor is concrete; on top of that, the builder laid plywood and stuck Karndean glue on LVT using Karndean-supplied universal adhesive. I also got gas underfloor heating installed under it. The issue is that when I turned the underfloor...

Thanks for your response. So you suggest that I need to fit the nest box replacing this?

Hi yes it's BDR91

It's not hive, it's a basic Honeywell thermostat

Moved into a new place that has a system Boiler. Can some one pls tell what are the white electrical boxes for? Need to fit in a nest thermostat on this. I think it will go in the top most White box but just wanted to make sure. Thanks

I done the way you said, but sprinkled some water from the hose afterwards. Was that a right thing to do?

Filled 1part cement and 3 part sand into the gaps of paving slabs. Made a dry mix and then sprayed with some water. Tried the wet sloppy mix but not my cup of tea as I have never done this before. Can you please tell me how long will this take to dry and do I need to spray more water after...

I agree that they are designed to run continuously but what if the fan goes faulty or the unit. There should be a switch to turn it off. Turning the mains off is not an optimal solution

Hello, Had damp issue in my buy to let and got a system put in wherein they put outlets in the bedrooms and a fan sort of thing that pulls air in the property. The work seems to have been done fine but they didn't add a switch to turn the system off, they just wired it into a socket in the...

Hi, thanks for your help. I have installed this now. One last question if you could help pls. Can i use the micro usb socket from the box to power the nest donut. ? Or any phone charger with usb or need a specific one? Thanks

Thanks for your response. Could you tell me which wire from my existing connection will go where? I understand where L and N will go. Could tell me where will the other to go from my thermostat into the nest box. About wiring the donut. I think they provide a wire to power it from the box and...

Planning to change from Salus RT500RF thermostat to nest . This is the wiring in the pic attached. Would you be able to tell me if this is a straight swap or am i missing any wires here. Thanks

Its attached to wall

Hello, I have this old cooker hood that has packed up now and would like to replace it. It is a vented japanese model (was already there when I bought the house). The issue is that the vent hole is not above the chimney as usually is the case. Can anyone please suggest how can I go about...