Could someone please show/tell me the best way to install this:-
http://www.allbriteuk.co.uk/pdf/aube-132-af.pdf
The module will be about 1.5m high on the wall above a plug socket... I will need to channel down the wall for the floor sensor wire to be placed in between the wires of my...
1. I'm tiling a bathroom floor which will be heated underneath with underfloor heating mats from B&Q... 2m x2m.
Question.... What sort of Ply do I need and how thick should the ply be? Plus how often should I screw the ply in to the floor?
2. What sort of Ply would I need for boxing in the...
Hi all,
1. There's a huge gap (5-10mm) filled with a horrible sticky grey substance looks like chewing gum actually but more stickier!
This doesn't look very nice and needs to be removed although my 2 year old daughter as smeared most of it down the pedasal!
What's the best way of...
Hi all.. Sorry to post this again... but no real help from b4
I have just purchased a 500watt PIR halogen floodlight. My question is what's the best and easy way of wiring this... to the mains or light circuit? Which ever is the best any diagrams available?
I must also add that INDOORS about...
Many thanks for all your comments(I'll be changing to a 150watt tomorrow) but it will please me and a few other people that may have the same problem as I, about installing a external light. If we can get a solution about my first question?
And yep, it is a PIR light. cheers andy
No worries there... Although it is outside, the light is postioned within an alcove and will point more towards the floor basically iluminating our back door entrance which is again in the alcove part!
Thanks for your concern anyway.
Hi all..
I have just purchased a 500watt PIR halogen floodlight. My question is what's the best and easy way of wiring this... to the mains or light circuit? Which ever is the best any diagrams available?
I must also add that INDOORS about 2 metres away from where the floodlight will be...
I want to replace a radiator but would like to know step by step of how to drain the system..
*For some reason I have two tanks up in the loft one big one small no drain cock but I've been told to tie the floats arms to a batten...?
*I have an old boiler with all the lagging round in the...
Thanks I'll try all of the above... i did forget to mention that it's only lining paper but I still want a neat job done... it's the perfectionist in me!!
Hi fellows...
I have a leaking STOP COCK in the kithen any ideas of how to stop the leak without replacing it...? It looks like a very old stop cock probably from the 60's when the house was built...
If one needs to replace can anyone point me in the direction - would love to do it myself...
First of all let me just say that i'm a first time DIYer and entering a forum such as this one is very helpful not just for myself but for any other enthusiastic DIYers.
Forum members, professionals and tradesmen like to share their knowledge as I would with my Graphic Design skills in TV...