Recent content by fayraz

Great, I presume the fittings will be OK as well?

Hi, I have installed a Magnaclean and wanted to put the MC3+ cleaner in for a week but not sure if it safe to do this with Speedfit plumbing or is it safe? Thanks.

Unfortunately the key does not turn fully in the lock, I pull the handle up turn the key the bolt comes out but then the key does not turn fully for me to get it out and when I go back the other way it unlocks and then I can take the key out. Hope that makes sense?

Hi, I got an issue where my front door does not lock with the key from outside but using the thumbscrew inside you can lock and unlock the door. So I thought easy fix I will change the cylinder but when I change the cylinder you can lock the door but cannot remove the key? The old one works...

Hi, I have bought a house and it has a Sani Condense pump under the boiler and the outlet tube is going straight up into the roof and out. I have tested the pump and it does fire up after I poured a couple of small glasses of water in it. But there is still water in the tank and in the...

Does anyone have a picture of a installed Telford Tornado tank I just want to look at the pipe layout? Thanks.

I popped the lid off and had a look and the tank was filled to the brim. Managed to siphon some off if not most off the water out: When I mentioned the tank was bulging, it must have been the insulation expanding with the water: You can just see the bulges in the...

Thanks for that I will take a look, why would the tank insulation start bulging I will have to take a picture of it and upload it, its a bit hard to explain.

Hi, Just noticed streams of water coming down my tank from the top. On closer inspection it looks like the tank has bulged out and you can feel hot spots in various places on the tank. Could it be pressure building up in the tank?

Turned into an interesting topic, I used to have my WB 30CDi System Boiler on 5 but thought it was too high at 65c so have turned it down to 4 and the temp is now about 58c has not dropped much. I also have the TD200 & RT10 intelligent package and the RT10 is set to 20c so is it best to have...

I hope not, I will have a look tonight and see what pressure it is exactly running at. Thanks.

Hi, Yes I repressurised the system to 1.25 cold which rises to about 1.75 when hot. I am going to try bleeding the radiators again tonight, I hope it is just trapped air. Is it always best to bleed radiators with the heating off or on?

Hi, Just after a bit of advice , I have installed the Magnaclean TwinTech and has been running fine but then I noticed one of the radiator valves was leaking, I drained the system fixed the valve and all was good. But yesterday the heating and hot water stopped working on the boiler, I...